Thread Rolling Die Making Machine

Hydraulic Thread Rolling Machine 3 Roll equipment is intended for suitable external thread-forming applications using three profiled rolls around the workpiece. The published IMC description identifies a three-point arrangement at 120 degrees with hydraulic feed. For a tubular component, the application review must include the wall and end condition as well as the outside diameter and finished thread.

Review the tube or solid component first
Send a sectioned drawing when the workpiece is hollow. State outside diameter, inside diameter or wall thickness, material grade and any prior heat treatment. Include the overall length and the position of the threaded portion. A solid screw and a hollow scaffolding part can need different preparation and support decisions despite a similar external thread.

Tubular components should be assessed for the proposed forming process rather than selected from diameter alone. Ask IMC to review the blank, wall, profile and the required fit together. Explain which dimensions must remain within tolerance after rolling. The acceptance plan should include any internal or external condition that matters to the finished assembly.

The source description places the working rolls around the circumference at 120 degrees. It describes hydraulic slide feeding and a process arrangement that does not use the conventional support blade during forming. Confirm how the offered station locates and supports your component through loading, forming and unloading. A three-point principle does not eliminate the need to assess handling or long-stock support.

Three-roll thread forming uses the die profiles to displace material into the required external geometry. Establish the blank dimensions and finish specified for the selected application. Thread form, pitch and rolling length should be reviewed alongside the material condition. Do not interpret a general process description as a guarantee against distortion for every hollow section.

Packaging : standard export wooden case packing. you can by sea or air. We have our own farwarder. We can check the delivery information timely. You can also use forwarder by yours. We will contact with him ASAP.

Delivery time:6-10 days after receiving the deposit.

Hot Tags: thread rolling die making machine, China thread rolling die making machine manufacturers, suppliers, factory, 3 Die Thread Rolling Machine, 3 Roll Thread Rolling Machine, Hydraulic Rod Thread Rolling Machine, Pipe Thread Rolling Machine, Pipe Thread Thread Rolling Machine, Scaffolding Pipe Thread Rolling Machine